Increased DNA methylation contributes to the early ripening of pear fruits during domestication and improvement.

BACKGROUND: DNA methylation is an essential epigenetic modification. However, its contribution to trait changes and diversity in the domestication of perennial fruit trees remains unknown. RESULTS: Here, we investigate the variation in DNA methylation during pear domestication and improvement using whole-genome bisulfite sequencing in 41 pear accessions. Contrary to the significant decrease during rice domestication, we detect a global increase in DNA methylation during pear domestication and improvement. We find this specific increase in pear is significantly correlated with the downregulation of Demeter-like1 (DML1, encoding DNA demethylase) due to human selection. We identify a total of 5591 differentially methylated regions (DMRs). Methylation in the CG and CHG contexts undergoes co-evolution during pear domestication and improvement. DMRs have higher genetic diversity than selection sweep regions, especially in the introns. Approximately 97% of DMRs are not associated with any SNPs, and these DMRs are associated with starch and sucrose metabolism and phenylpropanoid biosynthesis. We also perform correlation analysis between DNA methylation and gene expression. We find genes close to the hypermethylated DMRs that are significantly associated with fruit ripening. We further verify the function of a hyper-DMR-associated gene, CAMTA2, and demonstrate that overexpression of CAMTA2 in tomato and pear callus inhibits fruit ripening. CONCLUSIONS: Our study describes a specific pattern of DNA methylation in the domestication and improvement of a perennial pear tree and suggests that increased DNA methylation plays an essential role in the early ripening of pear fruits.

Nanoparticulate ZrNi: In Situ Disproportionation Effectively Enhances Hydrogen Cycling of MgH2.

High thermal stability and sluggish absorption/desorption kinetics are still important limitations for using magnesium hydride (MgH2) as a solid-state hydrogen storage medium. One of the most effective solutions in improving hydrogen storage properties of MgH2 is to introduce a suitable catalyst. Herein, a novel nanoparticulate ZrNi with 10-60 nm in size was successfully prepared by co-precipitation followed by a molten-salt reduction process. The 7 wt % nano-ZrNi-catalyzed MgH2 composite desorbs 6.1 wt % hydrogen starting from ∼178 °C after activation, lowered by 99 °C relative to the pristine MgH2 (∼277 °C). The dehydrided sample rapidly absorbs ∼5.5 wt % H2 when operating at 150 °C for 8 min. The remarkably improved hydrogen storage properties are reasonably ascribed to the in situ formation of ZrH2, ZrNi2, and Mg2NiH4 caused by the disproportionation reaction of nano-ZrNi during the first de-/hydrogenation cycle. These catalytic active species are uniformly dispersed in the MgH2 matrix, thus creating a multielement, multiphase, and multivalent environment, which not only largely favors the breaking and rebonding of H-H bonds and the transfer of electrons between H- and Mg2+ but also provides multiple hydrogen diffusion channels. These findings are of particularly scientific importance for the design and preparation of highly active catalysts for hydrogen storage in light-metal hydrides.

A Unique Double-Layered Carbon Nanobowl-Confined Lithium Borohydride for Highly Reversible Hydrogen Storage.

Poor reversibility and high desorption temperature restricts the practical use of lithium borohydride (LiBH4 ) as an advanced hydrogen store. Herein, a LiBH4 composite confined in unique double-layered carbon nanobowls prepared by a facile melt infiltration process is demonstrated, thanks to powerful capillary effect under 100 bar of H2 pressure. The gradual formation of double-layered carbon nanobowls is witnessed by transmission electron microscopy (TEM) observation. Benefiting from the nanoconfinement effect and catalytic function of carbon, this composite releases hydrogen from 225 °C and peaks at 353 °C, with a hydrogen release amount up to 10.9 wt%. The peak temperature of dehydriding is lowered by 112 °C compared with bulk LiBH4 . More importantly, the composite readily desorbs and absorbs ≈8.5 wt% of H2 at 300 °C and 100 bar H2 , showing a significant reversibility of hydrogen storage. Such a high reversible capacity has not ever been observed under the identical conditions. The usable volumetric energy density reaches as high as 82.4 g L-1 with considerable dehydriding kinetics. The findings provide insights in the design and development of nanosized complex hydrides for on-board applications.

Changes in the cell wall during fruit development and ripening in Fragaria vesca.

Although fruit expansion during ripening has been extensively studied, the structural and metabolic mechanisms remain largely unknown. Here, we report the critical roles of cell separation and cell wall metabolism in the coordinated regulation of fruit expansion in Fragaria vesca. Anatomical observations indicated that a syndrome of cell separation occurred from the very earliest stage of fruit set. Cell separation led to an increase in apoplastic space, and the time course of this increase coincided with the period of fruit development and ripening. Moreover, massive cellulose disassembly occurred when cells were fully separated, which coincided with the expansion of cell and fruit volume. Consistent with the anatomical observations, both histochemistry and composition analysis indicated correlations between cell separation and the cell wall metabolism. These observations suggest that cell separation, cell elongation and cell wall disassembly occur simultaneously during fruit ripening in Fragaria vesca.

Dielectric resonator method for determining gap symmetry of superconductors through anisotropic nonlinear Meissner effect.

We present a new measurement method which can be used to image the gap nodal structure of superconductors whose pairing symmetry is under debate. This technique utilizes a high quality factor microwave resonance involving the sample of interest. While supporting a circularly symmetric standing wave current pattern, the sample is perturbed by a scanned laser beam, creating a photoresponse that was previously shown to reveal the superconducting gap anisotropy. Simulation and the measurement of the photoresponse of an unpatterned Nb film show less than 8% anisotropy, as expected for a superconductor with a nearly isotropic energy gap along with expected systematic uncertainty. On the other hand, measurement of a YBa2Cu3O7-δ thin film shows a clear 4-fold symmetric image with ∼12.5% anisotropy, indicating the well-known 4-fold symmetric dx2-y2 gap nodal structure in the ab-plane. The deduced gap nodal structure can be further cross-checked by low temperature surface impedance data, which are simultaneously measured. The important advantage of the presented method over the previous spiral resonator method is that it does not require a complicated lithographic patterning process which limits one from testing various kinds of materials due to photoresponse arising from patterning defects. This advantage of the presented technique, and the ability to measure unpatterned samples such as planar thin films and single crystals, enables one to survey the pairing symmetry of a wide variety of unconventional superconductors.

Reaction-Ball-Milling-Driven Surface Coating Strategy to Suppress Pulverization of Microparticle Si Anodes.

In this work, we report a novel reaction-ball-milling surface coating strategy to suppress the pulverization of microparticle Si anodes upon lithiation/delithiation. By energetically milling the partially prelithiated microparticle Si in a CO2 atmosphere, a multicomponent amorphous layer composed of SiO x, C, SiC, and Li2SiO3 is successfully coated on the surface of Si microparticles. The coating level strongly depends on the milling reaction duration, and the 12 h milled prelithiated Si microparticles (BM12h) under a pressure of 3 bar of CO2 exhibit a good conformal coating with 1.006 g cm-3 of tap density. The presence of SiC remarkably enhances the mechanical properties of the SiO x/C coating matrix with an approximately 4-fold increase in the elastic modulus and the hardness values, which effectively alleviates the global volume expansion of the Si microparticles upon lithiation. Simultaneously, the existence of Li2SiO3 insures the Li-ion conductivity of the coating layer. Moreover, the SEI film formed on the electrode surface maintains relatively stable upon cycling due to the remarkably suppressed crack and pulverization of particles. These processes work together to allow the BM12h sample to offer much better cycling stability, as its reversible capacity remains at 1439 mAh g-1 at 100 mA g-1 after 100 cycles, which is nearly 4 times that of the pristine Si microparticles (381 mAh g-1). This work opens up new opportunities for the practical applications of micrometer-scale Si anodes.

The Mechanism of Electrolyte Gating on High-Tc Cuprates: The Role of Oxygen Migration and Electrostatics.

Electrolyte gating is widely used to induce large carrier density modulation on solid surfaces to explore various properties. Most of past works have attributed the charge modulation to electrostatic field effect. However, some recent reports have argued that the electrolyte gating effect in VO2, TiO2, and SrTiO3 originated from field-induced oxygen vacancy formation. This gives rise to a controversy about the gating mechanism, and it is therefore vital to reveal the relationship between the role of electrolyte gating and the intrinsic properties of materials. Here, we report entirely different mechanisms of electrolyte gating on two high-Tc cuprates, NdBa2Cu3O7-δ (NBCO) and Pr2-xCexCuO4 (PCCO), with different crystal structures. We show that field-induced oxygen vacancy formation in CuO chains of NBCO plays the dominant role, while it is mainly an electrostatic field effect in the case of PCCO. The possible reason is that NBCO has mobile oxygen in CuO chains, while PCCO does not. Our study helps clarify the controversy relating to the mechanism of electrolyte gating, leading to a better understanding of the role of oxygen electro migration which is very material specific.

Switchable Ultrathin Quarter-wave Plate in Terahertz Using Active Phase-change Metasurface.

Metamaterials open up various exotic means to control electromagnetic waves and among them polarization manipulations with metamaterials have attracted intense attention. As of today, static responses of resonators in metamaterials lead to a narrow-band and single-function operation. Extension of the working frequency relies on multilayer metamaterials or different unit cells, which hinder the development of ultra-compact optical systems. In this work, we demonstrate a switchable ultrathin terahertz quarter-wave plate by hybridizing a phase change material, vanadium dioxide (VO2), with a metasurface. Before the phase transition, VO2 behaves as a semiconductor and the metasurface operates as a quarter-wave plate at 0.468 THz. After the transition to metal phase, the quarter-wave plate operates at 0.502 THz. At the corresponding operating frequencies, the metasurface converts a linearly polarized light into a circularly polarized light. This work reveals the feasibility to realize tunable/active and extremely low-profile polarization manipulation devices in the terahertz regime through the incorporation of such phase-change metasurfaces, enabling novel applications of ultrathin terahertz meta-devices.

Simultaneous determination of homoeriodictyol-7-O-beta-D-Glccopyranoside and its metabolite homoeriodictyol in rat tissues and urine by liquid chromatography-mass spectrometry.

A liquid chromatographic-mass spectrometric (LC-MS) method was developed and validated for the simultaneous determination of homoeriodictyol-7-O-beta-D-glycoside (HEDT-Glc) and its active metabolite homoeriodictyol (HEDT) in rat tissues and urine. The analytes and internal standard (dihydromyricetin, IS) were detected by using negative atmospheric pressure chemical ionization mass spectrometry in selected ion monitoring (SIM) mode at m/z 464, 301 and 319 for HEDT-Glc, HEDT and IS, respectively. These compounds were eluted on a Luna reverse phase column. The mobile phase was a methanol-water mixture (70:30, v/v) containing 0.1% of formic acid at a flow rate of 0.8 ml/min. The limit of quantification (LOQ) for both HEDT-Glc and HEDT was 10 ng/ml and their limit of detection (LOD) was 1 ng/ml. Calibration curves were linear (r>0.995) over a wide range of the analytes in tissues and urine. The mean extraction recoveries were >or=75.6% for HEDT-Glc and >or=82.4% for HEDT from biological matrixes. Accuracy, expressed as the relative error, ranged from -4.0% to 3.8% for HEDT-Glc and from -2.8% to 4.7% for HEDT. The method was successfully applied to the estimation of HEDT-Glc and its metabolite HEDT in rat tissues and urine.